Lead Jack Repair Kit for Stromberg Carlson Landing Gear
(51 reviews)
Price: $46.49
In Stock
Lead Jack Repair Kit for Stromberg Carlson Landing Gear
Item # LG-146059
Retail:$62.02
Our Price: $46.49
You Save: 25%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (51)
- Q & A (0)
- Videos (1)
- Photos
Stromberg Carlson Accessories and Parts - LG-146059
- Camper Jacks
- Trailer Jack
- Hardware
- Repair Kit
- Stromberg Carlson
Instead of spending money on a replacement lead jack for your landing gear, fix your broken jack with this repair kit. The lead jack has a mounting location for a crank or motor, and it connects to the follow jack with a cross shaft.
Features:
- Includes the gears and pins required for repairing the lead jack in your landing gear
- Lead jack is the jack in the landing gear that the hand crank or motor mounts to
- Designed for use with Lippert Components Venture LG-1 or LG-183708 landing gear
- 1-Year warranty
LG-146059 Stromberg Carlson Lead Leg Repair Kit for Fifth Wheel Landing Gear
California residents: click here
Video of Lead Jack Repair Kit for Stromberg Carlson Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Stromberg Carlson - Trailer Jack,Camper Jack - LG-146059
Today we're going to take a look at the Lee Jack Repair Kit for the Stromberg Carlson Landing Gear.Now, instead of having to spend money on a replacement lead jack for your landing gear, you can just fix your broken jack with this repair kit. The lead jack is the jack in the landing gear that the hand crank, or the motor, mounts to, and it connects to the follow jack with a cross shaft. This part here is designed for use with the Lippert Components Venture LG1 or the LG-183708 landing gear.This kit here includes everything laid out here on the table. It includes the lead driveshaft, the two driveshaft bushings, a shim washer, an e-clip, the two bevel gears, and the two drive pins to go into the bevel gears.That should do it for the review on the lead jack repair kit for the Stromberg Carlson Landing Gear.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Lead Jack Repair Kit for Stromberg Carlson Landing Gear - LG-146059
Average Customer Rating: 4.9 out of 5 stars (51 Customer Reviews)
Instead of spending money on a replacement lead jack for your landing gear, fix your broken jack with this repair kit. The lead jack has a mounting location for a crank or motor, and it connects to the follow jack with a cross shaft.by: Randy J.07/17/2013
Product arrived a day early. Quality was as good, if not better than OEM part. I was able to uninstall the lead jack, repair it, and reinstall in under 2 hrs... that's not bad for someone as mechanically challenged as me. the majority of my time was spent cutting out the mounting bolts because the factory idiots installed the bolts and then welded the unit in palce afterwards (making it impossible to remove the bolts since they were blocked by the bulkhead). I cut them out and had replacement bolts on hand. I initially thought instructions should have been included, but once I started to disassemble the lead jack it was pretty easy to determine the way forward. Good Product! I will use etrailer again.
by: Greg 03/29/2024
Received the part quickly. Service was excellent!
by: Frank 10/06/2023
It is exactly what I needed
by: James H.11/29/2013
Easy repair with the landing leg removed from the trailer. Fit the Venture leg exactly. Only took 25 minutes to replace the gears.
James H.
11/29/2014
After a summer of heavy use the repair is still like new.
by: Nick06/25/2018
Worked perfect and was exactly what I needed. Local shop wanted over $60 and had to special order the parts with a 2 week turn around. Found on etrailer and got in in 4 days. Parts were exact replacements and exact fit. Perfect!!!
Nick
6/25/2019
Parts are working flawlessly. Have not had any problems at all with the operation. I purchased a second one do have on had for the other side just incase i habe a othe problem.
by: Matt T04/25/2015
Exact Replacement!
The lead leg of my RV landing gear would not extend. I called and spoke to Nicky to confirm this was the correct kit for my Venture landing gear. When it arrived the packing actually states "for Venture landing gear". It was easy to install. I had small issue removing the broken gear set, but, installation of the new was easy and straight forward! Highly recommend this kit to anyone rather than replacing the entire leg!
by: Albert04/19/2018
As a kit, it is excellent. I actually only needed the upper retaining pin ( 3 times now), and it gets expensive buying the whole kit for one small part. I did use the entire kit and replaced everything each time. The hardest part of the install was figuring out how to disassemble the broken one the first time (now you tell me there's video.....). Next hardest is getting the new parts in their proper place to be able to install the upper pin.
by: James a01/25/2018
We have been traveling in a fifth wheel rv for 3 months. Have needed etrailer's help with two different problems are very easy to talk to for information and parts. Were very prompt on getting parts to us in two different states. Were the right parts the first time around they really know the rv problems. The parts were quality grade and fit perfectly. Thank you e trailer!!!
by: Jim B02/28/2014
Just as described. Fast shipping. Problem I had was that lipert components changed there suppler in 2010 from stromberg-carlson to pacific industry's. (a tailor company) and you can't get parts.You have to buy the whole leg assembly. I took the leg gear and had it bored from 1/2 to 9/16 and was able to use this part. Darn you Lipert for changing suppliers. Ps, if you have the same problem don't use the spacer in the kit, use the thinner one off original,
by: Rob L08/28/2014
Part worked perfectly for my cherokee fith wheel, fast shipping. Will definitely buy from etrailer again. Thank you
Rob L.
8/28/2015
Great thank ypu
by: W.Baggett12/31/2013
Jack repair kit was as described. Great quality item, parts were exact fit, no problems on install. Thanks e-trailer for great product. My thanks to Nancy for quickly getting my shipment out despite the Holiday rush. The entire crew at e-trailer great job!!. Will definitely continue ordering parts from your company.
by: Eric S07/22/2019
Gots to have these handy. Don't want to find yourself in need of landing gear parts when you need them! Another etrailer success. Great to deal with.
by: jim Fulton09/30/2015
Excellent service and every thing was as to be . I was surprised at how many businesses told me I would have to purchase the whole leg assembly.even Montana told me that and thought that was wrong. Excellent service from ordering to receiving. Will definitely make e trailer the place to check for trailer parts.. Jim
by: Tom S.12/06/2015
I had ordered this part for my camper, and e-trailer was nice enough to call and tell me the parts would be in on a Monday and be shipped out ASAP. I got my parts as was told and the service was the best. I will use e-trailer for all my camper/trailer parts.
Thanks for the good service.
by: Tom Y06/05/2020
Great customer service, product worked perfectly. I was able to repair my landing gear, saved money by doing my self
by: R Hochnadel02/20/2014
Just what I needed to repair my wounded fifth wheel, installation was straight forward, all necessary parts were provided.
by: Steven05/01/2016
The people at etrailer was very helpful. The part was exactly what I need to fix my problem with my trailer. Thank you very much for the help!!!!!
by: Tom R.09/11/2015
The replacement gear kit worked great for my Venture leading landing leg. Not too difficult to install. The questions and answers on the website were very informative.
by: Larry04/09/2013
Good set of gears. Was a bit on the worrying side because they did not say that they would fit on a venture jack? But they did and are working just fine.
by: Pam06/29/2018
Product arrived a day earlier than expected. The customer service was outstanding. Would definitely do business with them again, just hope we don't have to, but owning an older trailer it is more than likely that we will. Thank you
by: Doug B.06/14/2013
Easy Install although instructions would have been nice
by: ROBERT A.03/10/2013
RECEIVED THE PARTS AND THEY FIT PERFECT. THIS IS A GOOD REPAIR KIT .
by: Scott08/12/2017
Very happy with replacement parts and was easy to install.
by: Raymond lessard07/07/2018
tout etais parfait sauf que le trou de la gear central etais trop petit et j ai du le faire maciner a part ca tout etais correct [Translation: everything was perfect except that the hole of the central gear was too small and I had to machine it all that was ok]
by: EDDY01/30/2015
awesome service great product installed in 20 min. the most trouble free purchase I have made have purchased from this company before has always been hassle free THANK YOU
25
51
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- 5th Wheel Landing Gear Lead And Follow Leg Bushing ReplacementsWe may have a solution for you, The Follow Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146060 which includes one follow drive shaft, two drive shaft bushings, one E-clip, one drive pin, one spiral pin, one 12T bevel gear, one 16T bevel gear, and one shim washer. Alternatively we also carry the Lead Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146059 which is a all in one repair kit for your lead leg that would include: Lead drive shaft, the two drive shaft bushings,...
view full answer... - What Size Is The Pin In The Lead Jack Repair Kit For Stromberg Carlson Landing GearThe pin in the Lead Jack Repair Kit for Stromberg Carlson Landing Gear, part # LG-146059, is 6-3/8" in length with a diameter of 1/2". It is designed to repair the following landing gear sets; Stromberg Carlson Electric Landing Gear Set, part # LG-1, or Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs, part # LG-183708. I have included product description links, video reviews of the Stromberg Carlson Landing Gear Sets and the Lead Jack Repair Kit, and a...
view full answer...
- Repair Kits for Lead and Follow Jack Landing GearThank you for the photo but trailer manufacturers do not keep any type of database with specific part numbers that we can access; even if they did it would not be a guarantee that the parts would be the same on a trailer that was made 20 years ago. The only repair kits we have are designed to be used with specific Lippert or Stromberg Carlson landing gear so you can take a chance and see if one of them will work. For a lead leg repair kit there is the Lippert # LC146059 or Stromberg Carlson...
view full answer...
- How To Service Landing Gear Legs On a 5th Wheel TrailerThe easiest option to replace or repair any parts in a landing gear setup would be to couple the trailer to the tow vehicle as this would then support the front of the trailer so you can make repairs as needed. If you are asking what needs to be done once the weight of the trailer is off the landing gear; the first step is to unbolt the motor, disconnect the intermediate shaft, remove the gearbox, and then undo the bolt for the weld stop brackets. Once the bolt is removed the landing gears...
view full answer... - Recommended 5th Wheel Landing Gear Repair Kit for 2006 Rage'N 5th WheelI could not find landing gear brand and specs for your 2006 Rage'N 5th wheel online but chances are very good that they are made by Lippert, who produces the majority of trailer frames for U.S. recreational vehicle manufacturers as well as landing gear sold under the Venture and Stromberg Carlson brands. Repair parts are commonly interchangeable between brands. For a replacement gear kit for a lead leg you can use part # LG-146059 and for a follower leg use part # LG-146060.
view full answer... - Lead And Follow Leg Repair Kit For A Lippert Venture Landing Gear VMC900R-327953For your lead jack leg on your Lippert Venture Landing Gear VMC900R-327953, you will want to use the Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059. As for a follow leg kit, you will want to use the Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear # LC146060. Attached are a couple of review videos for you to check out.
view full answer... - Replacement Gear Motor Kit for Lippert Electric Stabilizer 113407For your Lippert electric stabilizer 113407 we do offer a replacement gear motor kit, part # LC138445, which you can see in the linked review video. The gearbox portion only is not available by itself; I confirmed this with my contact at Lippert.
view full answer... - Lead Jack Repair Kit for Landing Gear The correct repair kit is going to depend on what model landing gear you have; the Lead Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146059 you referenced is designed specifically to work with landing gear # LG-1 or # LG-183708. It does have an E-clip, as you noted so if your gear does not use that it would not work. This is the only repair kit we currently carry for a lead (driver) leg.
view full answer... - LG-1 Landing Gear Repair Kit Recommendation and Install DiagramThe correct repair kit for the # LG-1 lead leg is part # LG-146059 and for the follower leg it's part # LG-146060. I attached a diagram that shows how these kits will install.
view full answer...
- Difference Between Lippert Lead Leg Repair Kit # LC146059 and Stromberg Carlson # LG-146059The Lippert Components Lead Leg Repair Kit # LC146059 and the Stromberg Carlson Kit # LG-146059 referenced in your question are essentially the same kit. I went out to our warehouse to verify this. It is actually not too uncommon for landing gear components like these to be interchangeable between different manufacturers, especially between Lippert and Stromberg Carlson. If you have a Lippert Landing Gear System on your 2007 Fleetwood Gearbox Fifth Wheel Trailer, then either of these kits...
view full answer... - How to Select Correct Replacement Parts for 5th Wheel Landing GearWith 5th wheel landing gear the two legs are usually referred to as the lead and follow legs. We offer complete replacement legs and also repair kits for both types. The size and tooth count for gears included in these repair kits, such as Stromberg Carlson kit # LG-146059, varies by brand, weight rating and for lead versus follow leg applications. This particular kit is for the lead leg in either a Venture # LG-1 or Stromberg Carlson # LG-183708 landing gear set. We also have replacement...
view full answer... - Venture Bevel Gear Kit InstructionsTo help I have included the written instructions below and also a diagram that points out the parts mentioned in the written instructions for the entire kit for the replacement gear and shaft kit for your Venture landing gear leg. The instructions cover removal of old parts and install of new parts. Disassembly: 1. Remove 914-10 Top Cover (pry it up with screwdriver). Set aside to reuse. 2. Rotate Drive Shaft until 1020-08 Spirol Pin is vertical. Drive pin out with a hammer and punch....
view full answer...
- Replacement Parts for Stromberg Carlson Landing Gear LegsI spoke with my contact at Stromberg Carlson and they do not offer the Jack Nut 911-10 as a replacement part. Therefore, your only option would be to replace the entire landing gear leg. I have attached these replacement options for you as well. There is a repair kit available, the Jack Repair Kit for Stromberg Carlson Landing Gear part # LG-146059 for lead and part # LG-146060 for follow but it does not include the jack nut. Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"...
view full answer... - Landing Gear Issues After Replacing Motor, Gear Box And Using Repair KitIf you have replaced the motor, gear box and now have used the repair kit the problem may be a nut or screw inside the jack leg, or the rod you mentioned. It can be difficult to find the problem with a landing gear and you may decide to replace the leg or legs of your landing gear. For a replacement lead leg, part # LG-179013, is rated for 3,000-lbs, is a likely fit. The repair kit for the lead leg is part # LG-146059. The matching follower leg is part # LG-179014.
view full answer... - Landing Gear Repair Kit Recommendation for Lippert Landing Gear with 16 and 12 tooth GearsWe do have the part you are looking for. On our site it is part # LC146059. This is the gear kit that has the 12 and 16 tooth gear kits like you said you need. This would be the correct kit for you.
view full answer... - Correct Replacement Landing Gear Legs for a 2006 Rockwood Signature Ultra LiteIf you will just be replacing the internal gears then you don't really need to verify what type of landing gear legs you have as the Landing Gear Jack Repair Kits part # LG-146059 for lead legs or part # LG-146060 for follow legs are universal and work with most landing gear sets. If you will be replacing the entire jack legs then you really only need to verify the outer tube length and weld stop spacing. That said, for a Rockwood Signature Ultra Lite the Stromberg Carlson Landing Gear...
view full answer...
- Can a Motor Be Added to Lippert/Venture Landing Gear JacksMy contact at Lippert Components confirmed that their manual landing gear # LC333966 can indeed be converted to powered operation later on through use of their motor kit # LC142178 and switch kit # LG-145236. You can use the same gearbox that comes with the manual landing gear. There would be no need to convert the follow leg to the shaft of a lead leg. Venture and Lippert landing gear brands are the same. If you are looking for a way to convert your landing to a dual motor setup...
view full answer... - Replacement Landing Gear Repair Kit for VMC900R JacksThe difference in the repair kits for your VMC900R will be the Drive Shaft; a lead leg kit will have a different shaped shaft than the follow leg. The replacement Landing Gear Kit for Venture Follow Legs is # LC146060, while the Lead Leg repair kit is # LC146059. I have linked all of the above mentioned products to this page for your convenience.
view full answer... - Lead Leg Repair Kit for Venture Brand 5th Wheel Trailer Landing GearIf you mean Venture and not Ventura then yes, the Lead Jack Repair Kit # LG-146059 will fit for Venture LG-1 or LG-183708 landing gear. The Venture brand was made by Lippert Components so if you see that name anywhere on your jacks then that is another indication that it would fit.
view full answer... - Troubleshooting How To Remove Spriol Pin From Landing Gear Shaft That Won't Raise Or LowerIf the shaft for the your jack is spinning freely due to the spirol pin being damaged, you will be able to remove the e-clip from the shaft and remove the shaft with the gear and damaged spriol pin in place. The Lead Jack Repair Kit # LG-146059 will have new gears, shaft, pins and clips to replace the damaged or missing parts.
view full answer... - Is it Possible to Convert a Stromberg Carlson Follower Leg to a Lead LegI spoke to my contacts at Lippert and Stomberg Carlson and they all said that there is no recommended way to convert a follower leg to a lead leg. The only solution for you would be to get a follower leg, part # LG-179013.
view full answer... - 5th Wheel Trailer Landing Gear Motor Strains and Gear Box Makes Noise and ShakesIt could be the gear box or it could be damage to the screw or nut inside the jack leg(s). If you have a Stromberg Carlson, Atwood, Lippert (LCI), or Venture landing gear system then # LG-179015 will fit. If you replace the gear box and still have the problem then I suspect there is a problem inside one of the legs and it will have to be replaced. For a replacement lead leg # LG-179013, rated for 3,000 pounds, is a likely fit. There is also a repair kit for this leg, # LG-146059. The...
view full answer... - Repair Kit for Venture VMC900R Lead Leg Which Will not MoveIf the pin on the lead leg of your Venture VMC900R is sheared, you would need to use Lead Jack Repair Kit # LG-146059. Should you wind up needing a new leg, you would only need to measure the outside tube; I've added a photo showing you the length of the outer tube of Replacement Lead Leg # LC119102, which is what you'd need to measure. That would be the correct replacement for your landing gear if your current leg was 29-1/2". If it measured 33-1/2" you'd want to use Replacement Lead Leg...
view full answer...
- Gear Kit to Repair Stromberg Carlson Landing Gear Legs that Stopped TurningYes you are on the right track. Sounds like you landing gear legs have internal problems that a gear kit like the part # LG-146060 should fix as you've replaced basically everything else. This kit is for the follower leg so for a driver leg as well you'd want the # LG-146059.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Randy J.
1/16/2015
After a year, Ive had no issues with the new jack. Operates as needed.